Dallas–Fort WorthOverview

Commercial roofing

Turn the roof into a managed property record.

Commercial owners and managers need more than a one-time leak visit. The Jacob approach maps conditions, priorities, repairs, lifecycle options, and recurring records everyone involved can work from.

Request an assessment

A low-slope commercial roof at dusk, mechanical curbs silhouetted against a warm horizon.

Explore the collection

Follow the condition, system, or question.

Every record answers a distinct question. Filter the larger collections or browse the complete set.

Filter this collection

Showing 10 of 10 records

01 / TPO roofingA TPO roof is a field of seams, edges, drains, and details.

TPO roof assessment, repair, replacement, and documentation planning for DFW commercial properties.

02 / Roof coatingsRestoration begins with candidacy—not a sales promise.

Commercial roof coating and restoration-candidacy planning for DFW properties.

03 / EPDMEPDM is a rubber roof, and it moves for a living.

EPDM membrane work for DFW low-slope buildings: seam method, thermal movement, and the black-or-white surface decision.

04 / PVC membranePVC is the membrane for grease, chemicals and heat.

PVC roofing for Dallas–Fort Worth buildings: grease and chemical resistance, welded seams, and where the premium over TPO is earned.

05 / Modified bitumenModified bitumen is redundancy you can see.

Modified bitumen roofing for DFW low-slope buildings: multi-ply redundancy, torch, mop, cold-adhesive and self-adhered application.

06 / Commercial repairA commercial leak is a tracing problem before it is a repair.

Commercial roof repair in Dallas–Fort Worth: leak tracing on low-slope roofs, tie-ins, warranty conditions and work over an occupied building.

07 / Commercial replacementTear off or recover: the decision that sets the whole job.

Commercial roof replacement in DFW: tear-off against recover, insulation and cover board, phasing around operations, and rooftop access.

08 / Seams and testingA hot-air weld is either fused or it is only touching.

TPO seam welding and testing on DFW low-slope roofs: heat, speed and pressure, probe testing, destructive samples, and why a cold weld looks perfect.

09 / Coating chemistrySilicone, acrylic and urethane solve different roofs.

Choosing a roof coating chemistry for a DFW low-slope roof: ponding tolerance, dirt pickup, recoat behavior, film thickness, and what each asks of the substrate.

10 / Moisture surveyFinding the wet insulation before pricing the roof.

Infrared, capacitance and core sampling on DFW low-slope roofs: what each moisture survey method proves, the conditions it needs, and what it changes in a scope.

What this covers

Three things the assessment settles.

01
Roof map
Organize areas, penetrations, drains, previous repairs, and observed conditions.
02
Priority plan
Separate active water entry, near-term corrective work, monitoring, and capital planning.
03
Reporting for owners and boards
Create a record that can support facilities, ownership, tenants, and approved vendors.

A wide low-slope commercial roof running to a distant edge, mechanical units punctuating the field.

What to know

Clear decisions begin with the right distinctions.

A cast dome drain strainer set into a sump in a dark low-slope membrane roof, with a parapet and brick wall base flashing behind it.

Systems require specific competence

TPO, PVC, EPDM, modified bitumen, coatings, built-up, and metal systems have different details and repair methods. Confirm suitability, available capability and the proposed scope for the specific roof system.

Leak response and lifecycle planning

Investigate entry pathways, drainage, penetrations, seams, transitions, rooftop equipment interfaces, and previous work before defining a scope.

Safe and documented access

Site rules, access, fall protection, tenant/business impacts, weather, and rooftop equipment require a property-specific work plan.

Questions

Useful answers, without overpromising.

Does Jacob service every commercial roof type?

Confirm the roof system, project requirements and available service scope with Jacob before requesting a proposal. The pages explain system differences; they do not establish that every proposed project can be accepted.

Can reporting support multiple properties?

Agree the reporting requirements before assessment: building identifiers, accessible-area photographs, findings, access limitations and any completion documents included in the scope. Portfolio formats and compatibility with your existing system need separate confirmation.

Who is responsible for the equipment sitting on the roof?

Its owner, and that is settled before a scope is agreed rather than on the morning. Rooftop units, condensers, communications equipment and their ductwork belong to the mechanical, electrical and communications trades. What roofing owns is the membrane, the flashing around each curb, and the condition of the detail where the two meet. Anything that has to be lifted, disconnected or reset is coordinated with the trade that owns it, and that coordination is a line in the programme.

The tenants are still in the building. What do they need to be told?

When work starts, how long each area stays open, where the hoist or the container will stand, what the access route is, when noise and odour are likely, and who to contact when something goes wrong. On a phased job it is worth telling them which area is being worked on each week as well. Most complaints on an occupied building come from something nobody was warned about rather than from the work itself.

Assessment request

Tell us what is happening at the property.

Short, routing-only questions. Nothing here asks you to diagnose the roof yourself.