Dallas–Fort WorthOverview

Complete exterior solutions

One envelope, one contractor, one record.

Water and wind do not respect trade boundaries, and neither should the scope. A roof edge that drains into a failing gutter, onto rotted fascia, down cracked stucco that is then painted over, is four trades and one problem. Scoping the envelope as a whole is what stops each contractor pointing at the next one.

Request an assessment

The junction where a roof edge, fascia, gutter and brick wall meet, step flashing visible under the courses.

Explore the collection

Follow the condition, system, or question.

Every record answers a distinct question. Filter the larger collections or browse the complete set.

Filter this collection

Showing 11 of 11 records

01 / Gutters and drainageMove water away from the roof—and the property.

Gutters fail at the outlets, not the trough. How roof geometry, outlet count and discharge decide whether drainage works — and what an assessment records.

02 / StuccoA stucco crack is information, not automatically a defect.

Stucco assessment, repair and refinishing across Dallas–Fort Worth: what cracking means and what it does not.

03 / Exterior paintingMost exterior paint fails at preparation, not at the paint.

Exterior painting for DFW homes: surface preparation, sequencing after repair, and what North Texas sun does to a finish.

04 / Siding and wall claddingProtect the wall by getting the transitions right.

Siding repair and replacement in DFW: matching older profiles, what comes off to replace one panel, and why new cladding rarely fixes a window leak.

05 / Fascia and soffitRoof edges need structure, airflow, and water control to agree.

Fascia, soffit, roof-edge, and ventilation coordination for DFW properties.

06 / Gutter replacementA gutter run is only as good as what holds it up.

Seamless gutter replacement in DFW: hanger type and spacing, mitered corners, the fascia underneath, and the sequence with roof and drip-edge work.

07 / DischargeWhere the water goes after the downspout is a foundation question.

Downspout capacity and discharge on North Texas clay soils: why water at the base of a slab matters here, and what a discharge scope does and does not cover.

08 / Gutter guardsWhat a gutter guard fixes, and what it quietly moves.

Gutter guard types compared for DFW properties, how they attach at the roof edge, and the failure mode each design trades for the ones it removes.

09 / Fiber cementFiber cement is forgiving on the wall and unforgiving at the joints.

Fiber cement siding detail for DFW homes: butt joints and flashing, ground and roof clearances, cut edges, and the nailing that decides how long a wall holds.

10 / Weep screedStucco has a bottom edge, and it is meant to stay clear.

Weep screed and ground clearance on DFW stucco walls: what the bottom edge does, why buried stucco wicks, and what irrigation does to the base of a wall.

11 / Sealant workSome joints should be sealed. Some must be left open.

Exterior sealant work on DFW homes: joint design and backer rod, choosing a material that moves, and the joints that are supposed to drain and must not be caulked.

What this covers

Three things the assessment settles.

01
The whole envelope
Roof, edge metal, gutters, fascia, soffit, cladding, stucco, paint and drainage assessed as one system rather than six quotes.
02
Correct sequence
Order matters: stucco repair before paint, fascia before gutters, deck before covering. Out of sequence, good work gets undone.
03
One record
Every component, product, colour and detail in one file, so the next decision on the property starts from evidence instead of memory.

A single-storey tan-brick ranch house seen from the street beneath mature trees, its roof, fascia and front elevation in view.

What to know

Clear decisions begin with the right distinctions.

A gutter and fascia run along the eave of a brick home, downspout outlet visible.

Where the trades meet

Roof-to-wall, gutter-to-fascia and stucco-to-trim junctions need explicit attention. The scope should identify who is responsible for each connection.

What we will not bundle

If a component does not need work, it does not go in the scope. A full-envelope capability is not a reason to sell a full-envelope job.

Planning across years

Not everything has to happen at once. A sequenced plan that says what can wait, and for how long, is usually more useful than one large number.

Questions

Useful answers, without overpromising.

Do I have to use you for all of it?

No. Most properties need one or two components. The reason to scope the whole envelope is to know which ones, not to buy all of them.

Is exterior work scheduled around the roof?

Usually, and for a practical reason rather than a preference. Water runs downwards, so anything above sheds onto anything below: the roof edge onto the fascia, the fascia onto the siding, the siding onto the ground. Working in that order means a finished surface is not damaged by the work above it, and a leak found later has fewer places it could have come from.

Four trades keep pointing at each other. How does one scope stop that?

By naming the junctions rather than the components. Connections between roof and wall, gutter and fascia, stucco and trim, or cladding and an opening can cross trade boundaries. A scope that assigns each junction to a named party, in writing, is the whole difference. It also means one photograph set follows the entire path the water took.

Can the work be spread over several years?

Usually, and it is frequently the better plan. What a sequenced programme needs is an order that follows water, since anything above drains onto anything below, and a plain statement of what can safely wait and for roughly how long. That is more useful than one large figure, and it is checkable: each stage should close out its own record rather than leaving the next one to reconstruct what happened.

Assessment request

Tell us what is happening at the property.

Short, routing-only questions. Nothing here asks you to diagnose the roof yourself.